Series 3800 De-icing System (Wired)

The Series 3800 wired De-icing System is designed to solve communication issues during de-icing operations. The system consists of noise-attenuating headsets for both bucket and cab personnel, master and remote headset stations and appropriate jumper and power cords. The Series 3800 De-icing System is designed for streamlining and enhancing the efficiency of de-icing operations through clear communication.
Improved communication between de-icing personnel results in more productive application of costly deicing fluids, and helps prevent accidental aircraft damage. Weather-tight system components are built for rugged reliability and durability. Series 3800 De-icing System headsets and components are listed below.
View Series 3800 Deicing System Configuration
Improved communication between de-icing personnel results in more productive application of costly deicing fluids, and helps prevent accidental aircraft damage. Weather-tight system components are built for rugged reliability and durability. Series 3800 De-icing System headsets and components are listed below.
View Series 3800 Deicing System Configuration
Model H3332
Series 3800 Headset Typically Used by Bucket Operator during Wired Deicing Applications
Model H3392
Series 3800 Single-Ear Headset Typically Used Driver in Cab during Wired Deicing Applications
U3800 Master Station
The "heart" of the Series 3800 Intercom System
- One each is required per system.
- Accommodates two Headsets
- Should be installed where radio transmit functionality is not required
- Adjusts automatically for 12 or 24 VDC power source
- Draws less than 600 milliampere current
- Simple installation
- Dimensions: 8-1/4" L x 5-3/4" W x 4-3/4" D.
Key features include:
- Illuminated system on/off switch
- Master volume control
- Two Headset jacks with listen level controls
- Power input connector (C3820)
- Two remote output connectors (C38-XX)
- External 1-amp Slo-Blo fuse
U3801 Remote Headset Station
Used to expand the system beyond the Master Station
- Expands the system, usually at the end of a series of Headset Stations
- Accommodates one Headset
- Should be installed where radio transmit functionality is not required
- There are no output connectors for "daisy-chaining" additional modules
- Simple installation
- Dimensions: 3-1/4" L x 4-3/4" W x 3" D
Key features include:
- System input connector (C38-XX)
- Headset jack
- Listen level control
C3820 Power Cord
Connects U3800 Master Station to 12 or 24VDC power source
- 20' length of two-conductor shielded cable
- Two-socket MS connector on one end
- Stripped and tinned leads on other end
- Fuse kit included (2A-250V, Slo-Blo)
C38-XX Jumper Cord
C38-12,-25,-35,-50,-75,-100.
Connects modules with intercom system
- 4-conductor shielded cable with 4-pin MS connectors on each end
- Number after dash in model number indicates length in feet
- C3402 (2 ft.) and C3408 (8 ft.) jumper cords also available